Automotive Carbon Steel Mechanical Tubing ASTMA519 SAE1010 For Industry - Product
Place of Origin : Suzhou,China
Delivery Time : 30 Days
Product Description
Automotive Carbon Steel Mechanical Tubing ASTMA519 SAE1010 For Industry
Description:
# Standard:ASTMA519/DIN2391/C/EN10305-1/4 /SAEJ524/BS6323/4/JISG3445
# OD4-60mm,WT:0.5-6mm.
# Material:SAE1010,SAE1020,ST35,ST37.4,ST37,ST45,ST52,ST52.4,E235,E255,E355
# Delivery State:NBK/GBK/BK/BKW/BKS.
# Raw material:Bao Steel,Huai Steel,XingCheng Steel with good quality.
# Length:5.8m,6m.
# Package:Bundles or wooden cases.
# Surface Anti-rust:Both outside and internal tube surface flushin
Physical Specification
Other Specification : Automotive Carbon Steel Mechanical Tubing ASTMA519 SAE1010 For Industry
Description:
# Standard:ASTMA519/DIN2391/C/EN10305-1/4 /SAEJ524/BS6323/4/JISG3445
# OD4-60mm,WT:0.5-6mm.
# Material:SAE1010,SAE1020,ST35,ST37.4,ST37,ST45,ST52,ST52.4,E235,E255,E355
# Delivery State:NBK/GBK/BK/BKW/BKS.
# Raw Material:Bao Steel,Huai Steel,XingCheng Steel With Good Quality.
# Length:5.8m,6m.
# Package:Bundles Or Wooden Cases.
# Surface Anti-rust:Both Outside And Internal Tube Surface Flushing With Anti-rust Oil.
ToleranceTableofAutomotiveCarbonSteelMechanicalTubingASTMA519SAE1010
- - - -
NAME | SCOPE(mm) | GB (mm) | DIN (mm) | Enterprise Control(mm) | Special High-precision(mm) |
Out Diameter | 4-30 | 0.1 | 0.08 | 0.05 | 0.03 |
31-40 | 0.15 | 0.15 | 0.05 | 0.03 |
41-50 | 0.20 | 0.20 | 0.08 | 0.03 |
51-60 | 0.25 | 0.25 | 0.08 | 0.03 |
Wall Thickness | 0.5-7 | 10%,Min0.12 | 10% | 10%,Min0.05 | 10%,Min0.03 |
- - - -
Chemical Composition ForAutomotiveCarbonSteelMechanicalTubingASTMA519SAE1010
- - - -
Chemical Composition(cast Analysis)a |
Steel Grade | % By Mass |
Steel Name | C | Mn | P | Sb |
Max. | Max. | Max. | Max. |
1008 | 0.10 | 0.30-0.50 | 0.040 | 0.050 |
1010 | 0.08-0.13 | 0.30-0.60 | 0.040 | 0.050 |
1020 | 0.18-0.23 | 0.30-0.60 | 0.040 | 0.050 |
- - - -
Quality:
# Surface Quality:very Smooth And Bright Without Oxide Scale,pock,strach,crack And Other Defects.
# Surface Roughness:Ra:0.8-1.3 Um.
# Straightness:0.5-1mm/1000mm.
# Internal Hole Cleaness:clean Without Iron Scrap,dust.
# Mechanical Properties:better