SFSP999 Tear Circle Raw Material Hammer Mill Machine - Product

Other Specification : SFSP999 Tear Circle Raw Material Hammer Mill Machine - - - - Model | Dia. Of Rotor (mm) | Width Of Grinding Chamber (mm) | Speed Of Rotor (rpm) | Power (kw) | Output (t/h) | SFSP999- | 1380 | 400 | 1480 | 90 | 15-20 | SFSP999- | 1380 | 500 | 1480 | 110 | 20-30 | SFSP999- | 1380 | 600 | 1480 | 132/160 | 30-40 | SFSP999- | 1380 | 800 | 1480 | 180/200 | 40-50 | - - - - Re: The Above Indices Are Those When Meeting The Following Conditions: Raw Material: Corn, Moisture Content Not Higher Than 14%, Density Not Lower Than 0.72t/m3, Screen: Hole Diameter 3mm, Hole-opening Rate Not Less Than 33%. 1.The Grinding Chamber Is Of Tear Circle Shape, Effectively Eliminating The Circular Flow In The Grinding Process And Getting Higher Capacity; 2.The Bottom Of Grinding Chamber Is Fitted With U-shape Double Grinding Structure, Further Improving The Capacity With Evener Particle Size; 3.Rotor Passes Accurate Dynamic Balancing Test, Resulting In Low Equipment Noise And Smooth Running. 4.Both Coarse And Fine Grinding Is Realized Through Adjusting The Gap Between Beater And Screen; 5.New Type S Shape Coupling Directly Connecting Driving Results In Big Offset Travel And Effectively Avoid The Heating Of Bearing; 6.Beater Blade Edge Is Vacuum-welded By Special Alloy Steel, Resulting In Long Service Life; 7.The Imported Products Are Used For Key Parts, Resulting In Long Service Life And Low Maintenance Cost.; 8.The Moving Full-wide Operation Door Facilitates Maintenance And Replacing Of Beater; 9.SFSP999 Tear Circle Hammer Millis Widely Used In Various Feed Mills, Oil Plants, Alcohol Plants, Citric Acid Plants, Etc.

View Profile