MBR Membrane with 0.1um Pore Size, 40,000 ppm Chlorine Resistance and 506mm Width - Product

Other Specification : Key Specifications/Special Features: # Capacity: 140L/m/hr At 0.1 MPa, 15C # It Combines Membrane Separation With Tradition Biochemical Reaction And Greatly Increases The Biochemical Efficiency, Achieved By Prolonging The HRT (hydraulic Retention Time) And SRT (sludge Retention Time) # Small Footprint And Low Operation Cost # There Is No Need For Secondary Sedimentation Pond, So The Construction Will Be More Compact # Chemical Consumption Will Be Greatly Decreased Compared With Traditional Methods # The Membrane Silk Is Made Of PP (polypropylene) # With Our Unique Technology, The Fiber Is Modified And Enhanced To Have High Strength And High Toughness, So That It Can Work Under A Variety Of Bad Conditions # Outer And Inner Diameter Of The Membrane Silk Are 500 And 400um # It Is So Thin That Suspended Solids In The Water Can Quickly Plug The Cross Section Even When The Silk Is Broken # The Filtration Mode Is Out To In, And Because Of This Filtration Mode, The Pore On The Surface Of Membrane Silk Can Shrink During Filtering, So It Can Have A Higher Filtering Precision # And The Pore Will Expand During Backwashing, So It Can Wash Away Some Big Particles To Clean The Membrane At The Most # Our Enhanced Modified PP Material Has Great Fouling Resistant Ability, And It Can Recover Its Performance By Backwash Instead Of Chemical Cleaning # It Can Reduce The Damage To The Membrane Silk And Save The Cost On Chemicals # Technical Parameters: # Material: PP Hollow Fiber # Membrane Area: 10m/piece # MWCO: 50,000 To 100,000 Dalton # Pore Size: 0.1um # Treatment Capacity (for Domestic Sewage): 1.0m/d/piece # Air Flow Rate: 1.0m/h/piece # Maximum Content SS: 13g/L # Chlorine Resistance: 40,000ppm # Operating Cycle: # Filtration: 8 Minutes # Relax: 2 Minutes # Length: 1,000mm # Width: 506mm Primary Competitive Advantage

View Profile