LCS250 2 Drilling Mud Desander combination of ordinary desander and shale shaker - Product
Place of Origin : Zhangzhou,China
Delivery Time : 7-25days
Product Description
LCS250 2 Drilling Mud Desander combination of ordinary desander and shale shaker
LCS2502 Desander
Combination of ordinary desander and shale shaker
Rugged design, low maintenance & large capacity
Detailed Description
LCS 250 desander is a new type of second-stage solids control equipment for drilling fluid. It is a combination of an ordinary desander and a linear motion shale shaker. The major function of this type of desander is to remove fine solid particles which c
Physical Specification
Other Specification : LCS250 2 Drilling Mud Desander Combination Of Ordinary Desander And Shale Shaker
LCS2502 Desander
Combination Of Ordinary Desander And Shale Shaker
Rugged Design, Low Maintenance & Large Capacity
Detailed Description
LCS 250 Desander Is A New Type Of Second-stage Solids Control Equipment For Drilling Fluid. It Is A Combination Of An Ordinary Desander And A Linear Motion Shale Shaker. The Major Function Of This Type Of Desander Is To Remove Fine Solid Particles Which Can Not Be Screened By The Shale Shaker. Consequently The Second-stage Treated Drilling Fluid Goes Into The Third-stage Separating Equipment-desilter.
In Addition, This Improved Type Of Desander Can Reclaim The Barite In Mud To Saving The Cost Of Drilling. When The Desander Is Used, The Discharged Particles From The Bottom Mouths Of Hydrocyclones Were Fall Down Onto The Fine Screen. After The Treatment Of The Shaker, Sands Larger Than The Mesh Size Will Be Removed And Solid Particles Smaller Than The Mesh Size Will Back Into The Mud Circulation System Through The Screen.
The Desander Has The Advantages Of Rugged Design, Large Capacity, High Treating Quality, Durability, Fast Installation And Low Maintenance, Etc.
Technical Parameters
1. Desander
(1) Hydrocyclone Diameter: 250mm
(2) Inlet Pipe Diameter: 64mm
(3) Overflow Pipe Diameter: 110mm
(4) Number Of Cones: 2
(5) Bottom Mouth Diameter: 15, 20, 25, 30 Mm
(6) Working Pressure: 200---400 KPa
(7) Capacity:200 M/hour
(8) Separation Particle Size: 30-40 Um
(9) Recommended Sand Pump:
Discharge Capacity: 200m/hour
Power:1.72 KW
2. Shale Shakers
(1)Motor Power: 21.1 KW
Rotation Speed:1450 RPM
(2)Vibration Frequency: 18.3-18.6 Hz
(3)Screen Area:1480600 Mm
(The Screens Can Be Combined Randomly At Will)
(4)Exciting Force:1243Kg
(5)Amplitude: 8-14 Mm
(6)throwing Coefficient: 4-6
3. Other Parameters
(1) Outline Dimensions(LWH): 14601130 2100 Mm