Hydraulic curing press for PCR and LT tire (B-Type) - Product
Place of Origin : Qingdao,China
Delivery Terms : FOB
Delivery Time : 60 DAYS
Product Capacity : 20/MONTH
Payment Terms : T/T
Product Description
Hydraulic curing press for PCR and LT tire (B-Type) made by Qingdao Desiree Group Rubber Machinery Co.,Ltd is high-technology,good quality ,reliable and best price /service!
Basic Information
Brand : Desiree
Physical Specification
Other Specification : Hydraulic Curing Press For PCR And LT Tire (B-Type)
This Curing Press Is Side-plate Frame Type, Each Cavity Is Individually Operated. Each Beam Moves Up And Down Vertically On Guiding Rail, And Is Equipped With Safety Pin For Mould Locking. Each Mould Is Heated By Platen And Served By 6 Oil Pressuring Cylinders On The Bottom. Center Mechanism Can Either Be BOM Type. This Curing Press Is Equipped With Double-column Vertical Chuck And Swing Type Unloading Device For Tyre Loading And Unloading. As Per Customer’s Request, Auto Mould-adjusting Device, SMO Drive Device, PCI And Green Tyre Holder Are Available. Curing Piping Can Also Be Made To Order.
This Curing Press Uses PLC For Real-time Control, And Industrial PC For Human-Machine Operation Interface. All Parameters Can Be Re-set During Curing Cycle, And Real-time Data Collection/ Preservation, Alarming, As Well As Data Bak Dating Can Also Be Realized Through This System. With Ethernet Interface, Curing Press Group-management Is Available. One Oil Hydraulic Station Can Be Fitted On To Drive And Control One Or Up To Give Curing Presses. Proportional Electro-hydraulic Control Technology Is Adopted For Mould Open/close Speed Adjustment.
This Curing Press Is Applicable For Curing PCR, LTR And Bias Tyres With Nitrogen Or Steam As Curing Medium.
Item Unit Specification
B1145 B1220
Curing Cavity No. 2 2
ID Of Mould Shield MM Φ1145 Φ1220
Max Squeezing Force KN 1360x2 1960x2
Height Of Mould MM 220-440 300-560
Center Mechanism BOM(Oil Hydraulic) BOM(water Hydraulic)
Diameter Of Suitable Tyre Bead Inch 13-18 13-20
Max O.D.
Of Cured Tyre Segmented Mold MM Φ760 Φ860
Two Piece Mold MM Φ820 Φ900
Max Section Width Of Cured Tyre MM 300 350
Max Height Of Green Tyre MM 440 600
Designed Mould Open/close Time S 30/26 30/26
Max Load Of VCL Kg 50 80
Max Weight Of Mold Kg 2700 4500
High Pressure Oil Pressure Mp