HD-10C Power Plug Integrated Tester - Product

Brand : Hongdu
Model : HD-10C

Other Specification :  HONGDU TESTING EQUIPMENT CO.,LTD. HD-10C Power Plug Integrated Tester Product Explanation: This Tester Is An Integrated Tester For Plug.It Is Used To Test The Continuity,polarity,insulation,high-volt,leakage Current,E-wire High Voltage Of Power Plug.It Meets The Requirements Of Many International Standards Such As BIS, UL, CSA, VDE, BSI, DIN, CCC, IEC,etc.It Is A Totally Automatic Testing Machine Make Your Operation More Convenient And Simple. Features: * All Of The Test Subjects Will Done Automatically. * The Inner/outer High-volt Output Value Can Be Adjusted Separately. * Test Speed Is Quickly,all Test Subjects Will Be Achieved In 2 Seconds. * The PLC Control System Comes From Mitsubishi,Made In Japan. * The Relay Comes From Schneider,Made In French. * When Test Over,the Sample Will Be Pushed Out Automatically,and A €�T” Or Other Characters Will Be Marked On It(English Characters Only). * A Big Current With 0~30A Will Be Applied On E Wire To Check Whether It Is Eligible. Technical Parameter: Polarity Test Test E,L,N Wires In Sequence Insulation Test High-volt DC 500V+-3% Or AC 2500V+-3% Insulation Resistance 5,100MΩ(can Be Made To Order) Inner High-volt 0~5KV +-3% (adjustable) Inner Leakage Current 2,5,10mA(can Be Made To Order) Outer High-volt 0~5KV +-3% (adjustable) Outer Leakage Current 2,5,10mA(can Be Made To Order) Rated Power 500VA E Wire Test Current 0~30A(adjustable) Length Of Sample Less Than 10m Which 1.5mm2 Square Cylinder Power Compressed Air With 0.4 To 0.6Mpa Dimensions 1200mm W,900mm D,1540mm H Power Source AC 220V +-10%,50Hz Weight 60 Kg, Approximate NOTICE: 1,Inner High-volt Is Applied Between L,N,E Wires,and The Outer High-volt Is Applied Between L,N,E Wires And Jacket. 2,Both 3-wire And 2-wire Power Plug Can Be Tested By This Machine. Test Objects: Power Plugs

View Profile