IH End Suction Pump - Product

Other Specification : H End Suction Pump RANGE OF PERFORMANCE Capacity: 6.3---400m/h Head: 5---125m Speed: 2900r/min And1450r/min Power Of Fitted Motor: 0.55---90kW Inlet Diameter: 50---200mm The Highest Work Pressure: 1.6MPa Material: SS304, SS316, SS316L H End Suction Pump Are Classified As 29 Basic Types, Amongwhich, 22 Two-speed (2900, 1450r/min) Types Beingtransformed After Cut By The Impeller Diameter OfA And Bmodels, The Total Specifications Can Be 112. H End Suction Pump STRUCTURES DESCRIPTION 1. IH Model Pumps Are The Series Of Products Designed According To ISO International Standards In All Industries In China. It Is Mainly Composed Of Pump Body, Impellers, Seal Rings, Impeller Nuts, Pump Cover, Seal Parts, Intermediate Support, Spindle, Suspended Parts And So On. 2. Structural Features: The Pump Cover Is Fixed On The Intermediate Support, And The Pump Cover Is Clamped In The Middle By Coupling Between Pumpbodyand Intermediate Support. On The Pump Body, Water Is Input Axially And Output Radially. Support Feet Can Be Fixed On The Base Directly. The Suspended Parts Are Fixed Onto The Intermediate Support Through The Rabbet, And Are Supported Onto The Base By Suspended Frame. To Make It Convenient To Disassemble, The Prolonged Coupling Is Designed, So That It Is Unnecessary To Disassemble The Coupled Input & Output Pipes During Check And Maintenance. To Pump Body And Motor, Only By Disassembling The Intermediate Coupler Of The Prolonged Coupling, Users Are Able To Screw Out Rotor Part For Check And Maintenance, Which Is A Conventional Structural Pattern In The World. 3. Rotation Direction: The Pump Is Driven By Motor Directly Through A Prolonged Coupling, Seen From The Side Of The Motor, It Rotates Clockwise. 4. Spindle Seal Patterns: Spindle Seal Patterns Of Pump Are Of Two Types Such As Stuffing Seal And Mechanical Seal.

View Profile