U - Shape Double Grinding Tear Circle Hammer Mill Grinder Machine With Low Noise SFSP998 - Product
Place of Origin : Chang Zhou,China
Delivery Time : 45-90days
Product Description
U - Shape Double Grinding Tear Circle Hammer Mill Grinder Machine With Low Noise SFSP998
- - - -
Model | Dia. Of Rotor
(mm) | Width Of Grinding Chamber (mm) | Speed Of Rotor
(rpm) | Power
(kw) | Output
(t/h) |
SFSP998- | 1200 | 300 | 1480 | 55/75 | 10-15 |
SFSP998- | 1200 | 400 | 1480 | 90/110 | 12-20 |
SFSP998- | 1200 | 500 | 1480 | 110/132/160 | 25-35 |
SFSP998- | 1200
Physical Specification
Other Specification :
U - Shape Double Grinding Tear Circle Hammer Mill Grinder Machine With Low Noise SFSP998
- - - -
Model | Dia. Of Rotor
(mm) | Width Of Grinding Chamber (mm) | Speed Of Rotor
(rpm) | Power
(kw) | Output
(t/h) |
SFSP998- | 1200 | 300 | 1480 | 55/75 | 10-15 |
SFSP998- | 1200 | 400 | 1480 | 90/110 | 12-20 |
SFSP998- | 1200 | 500 | 1480 | 110/132/160 | 25-35 |
SFSP998- | 1200 | 600 | 1480 | 180/200/220 | 38-50 |
- - - -
Re: The Above Indices Are Those When Meeting The Following Conditions: Raw Material: Corn, Moisture Content Not Higher Than 14%, Density Not Lower Than 0.72t/m3, Screen: Hole Diameter 3mm, Hole-opening Rate Not Less Than 33%.
The Grinding Chamber Is Of Tear Circle Shape, Effectively Eliminating The Circular Flow In The Grinding Process And Getting Higher Capacity;
The Bottom Of Grinding Chamber Is Fitted With U-shape Double Grinding Structure, Further Improving The Capacity With Evener Particle Size;
Rotor Passes Accurate Dynamic Balancing Test, Resulting In Low Equipment Noise And Smooth Running.
Both Coarse And Fine Grinding Is Realized Through Adjusting The Gap Between Beater And Screen;
New Type S Shape Coupling Directly Connecting Driving Results In Big Offset Travel And Effectively Avoid The Heating Of Bearing;
Beater Blade Edge Is Vacuum-welded By Special Alloy Steel, Resulting In Long Service Life;
The Imported Products Are Used For Key Parts, Resulting In Long Service Life And Low Maintenance Cost;
The Moving Full-wide Operation Door Facilitates Maintenance And Replacing Of Beater;
SFSP998 Tear Circle Hammer Millis Widely Used In Various Feed Mills, Oil Plants, Alcohol Plants, Citric Acid Plants, Etc.