Diesel Process Gas Screw Compressor - Product

Other Specification : OIL FIELD GAS SCREW COMPRESSOR LGM2.5/0.18-0.9 EXPORTED TO KAZAKHSTAN Quick Detail: 1, SERIES : LGM(water-injected) 2, MODEL: LGM2.5/0.18~0.9 3, POWER: 45kw 4, CAPACITY: 2.5m/min 5, SUCTION PRESSURE: 0.18MPa 6, DISCHARGE PRESSURE: 0.9MPa Description: Flow Of Gas-Liquid Piping System: The Flammable Gas Comes From The Upstream Flows Into The Compressor After Purified By Scrubber, And Then Mixed With Injected Coolant During The Compression Process, And The Gas-liquid Mixture Will Be Discharged Flows Into The Separator After Compression And Cooling. The Separated Flammable Gas Enters Into Downstream Piping Network As Well As Separated Coolant Re-injected Into Compressor Internal, Doing The Closed Circulation In This Way. Process Of Lubricant Piping System: Lubricating Oil In Lubrication Oil Tank Pressurized Into The Main Oil Pipeline By Lubricant Pump, Passing Through The Filter And The Cooler Entering The Oil Distributor Before Divided Into Several Ways To The Corresponding Lubricating Point Of The Compressor. Then Flow Back To The Oil Tank Through Oil Return Pipe, And The Closed Circulation Is Finished. Applications: The Compressor Set Is Used To Extract And Pressurize The Petroleum Associated Gas, Which Is Extracted And Pressurized To 0.7-0.9MPa After Flashed, And Stored In A Large Tank To Make Convenience For Electricity Generation Of Downstream Natural Gas Generator ,there Is Any Left ,the Gas Will Be Pressurized To Store In The Underground By Reciprocating Compressor. This Set Has Effects On The Recycling The Petroleum Associated Gas And Saving Energy And Reducing Emission. Specifications : - - - - Model | LGM2.5/0.18-0.9 | Capacity | 2.5m/min | Suction Pressure | 0.18MPa(G) | Discharge Pressure | 0.9MPa(G) | Inlet Temp. | Ambient Temeperature | Outlet Temp. | 85 | Inject M

View Profile