9 bar Process Gas Screw Compressor - Product

Other Specification : WATER-INJECTED RECYCLING GAS PROCESS SCREW COMPRESSOR,SUCTION PRESSOR 0.4MPa,DISCHARGE PRESSURE 0.9MPa Quick Detail: 1, SERIES : LGM(water-injected) 2, MODEL: LGM25/0.4~0.9 3, POWER: 280kw 4, CAPACITY: 25m/min 5, SUCTION PRESSURE: 0.4MPa 6, DISCHARGE PRESSURE: 0.9MPa Description: Flow Of Gas-Liquid Piping System: The Flammable Gas Comes From The Upstream Flows Into The Compressor After Purified By Scrubber, And Then Mixed With Injected Coolant During The Compression Process, And The Gas-liquid Mixture Will Be Discharged Flows Into The Separator After Compression And Cooling. The Separated Flammable Gas Enters Into Downstream Piping Network As Well As Separated Coolant Re-injected Into Compressor Internal, Doing The Closed Circulation In This Way. Process Of Lubricant Piping System: Lubricating Oil In Lubrication Oil Tank Pressurized Into The Main Oil Pipeline By Lubricant Pump, Passing Through The Filter And The Cooler Entering The Oil Distributor Before Divided Into Several Ways To The Corresponding Lubricating Point Of The Compressor. Then Flow Back To The Oil Tank Through Oil Return Pipe, And The Closed Circulation Is Finished. Applications: The Compressor Set Is Used For Making The Gas Regeneration And Recycling Which Participates In The Reaction Of 200,000 Tons Per Year Btx Aromatics Project , Produced By Light Oil And Ether Carbon Four Of A Chemical Plant In Henan. The Compressor Set Can Keep The Gas Pressure At The 0.9MPa, When The Pressure Is Low, Use The Compressor To Pressurize, Recycle The Gas To Meet The Chemical Process. Specifications : - - - - Model | LGM25/0.4-0.9 | Capacity | 25m/min | Suction Pressure | 0.4MPa(G) | Discharge Pressure | 0.9MPa(G) | Inlet Temp. | 85 | Outlet Temp. | 85 | Inject Medium | Water (recycling) | Draw Ratio | 255/1.65 | Dr

View Profile