SGCC, DX51D 0.23mm to 3mm double side durability Hot Dipped Galvanized Steel Strip - Product

Other Specification : SGCC, DX51D 0.23mm To 3mm Double Side Durability Hot Dipped Galvanized Steel Strip For Constructions Hot Dipped Galvanized Steel Strip 1.Capacity: About 8000ton Per Month For Steel Sheet Product 2.Thickness: From 0.23mm To 3mm Process Of Galvanized Steel Strips : Pay Off Reel Double Cut Shear Welder-notcher Entry Accumulator Pre Cleaning Section Furnace Hot Bridle Zinc Pot Air Knife After Cooler Water Quench Dryer Skin Pass Mill Dryer Tension Leveler Dryer Chemical Coater Chemical Oven Cooler Exit Accumulator Oiler Exit Shear Tension Reel. Specifications OfGalvanized Steel Strips : 1) Capacity: About 10,000ton Per Month For Steel Tape Product 2) Thickness: From 0.20mm To 3.5mm, All Available. 3) Width: From 5mm To 600mm, All Available. 4) Grade: Q195, SGCC, DX51D 5) Coil Weight: From 5kg To 6000kg, All Available. 6) Coil ID: 100mm - 508mm 7) Coil OD: 500mm - 1300mm 8) Elongation: Min 10% 9) Tensile Strength: 28.1-49.2kgf/mm2 10) Zinc Coating Weight: Min. 106g/m2, Double Side 11) Min Trial Order 5ton Each Thickness, 1 X 20' Per Delivery. 12) Components: C% 0.07, Si%0.03, Mn% 0.50, P% 0.025, S% 0.025, Alt% 0.02 - - - - Grade | Q195, SGCC, DX51D | Thickness | 0.2mm-3.5mm | Width | 5.0mm-600mm | Coil Weight | 5-6000kg | Coil ID | 100-508mm | Coil OD | 500-1300mm | Elongation | Min. 10% | Tensile Strength | 28.1-49.2kgf/mm2 | Zinc Coating Weight | Min. 106g/m2 (double Side) | MOQ | 5 Tons | Components | Components: C% 0.07, Si%0.03, Mn% 0.50, P% 0.025, S% 0.025, Alt% 0.02 | - - - - - - - - Surface Finish | Pattern: | Application: | Regular Spangle | Standard Spanlges With Flower Pattern | General Uses | Minimized Spangle | Minimized Spangles Than Regu

View Profile