Zinc Die Casting Parts , High Precision Die Casting Moulding - Product
Place of Origin : Dongguan,China
Delivery Time : 10-30 Days After Order Being Confirmed
Product Description
Zinc Die Casting Parts , High Precision Die Casting Moulding
Quick Detail:
1. Good surface
2. Nice plating appearance
3. SGS report can be provide
4. Can make large part
5. Professional mold flow analysis
6. 100,000pcs be provided per month
Description:
Zinc die casting is a manufacturing process that can produce geometrically complex metal parts through the use of reusable molds, called dies. The die casting process involves the use of a furna
Physical Specification
Other Specification :
Zinc Die Casting Parts , High Precision Die Casting Moulding
Quick Detail:
1. Good Surface
2. Nice Plating Appearance
3. SGS Report Can Be Provide
4. Can Make Large Part
5. Professional Mold Flow Analysis
6. 100,000pcs Be Provided Per Month
Description:
Zinc Die Casting Is A Manufacturing Process That Can Produce Geometrically Complex Metal Parts Through The Use Of Reusable Molds, Called Dies. The Die Casting Process Involves The Use Of A Furnace, Metal, Die Casting Machine, And Die. The Melted Zinc In The Furnace And Then Injected Into The Dies In The Die Casting Machine.
Specifications:
- - - -
Product Name | Product No. | Material | Dimension | Weight | Surface Treatment |
Customized Zinc Alloy Die Cast Parts For Furniture | NY--108 | ZINC3 | 5*3.5*2.5cm | 120g | Plating |
- - - -
Applications:
Furniture
Competitive Advantage:
1. Can Produce Large Parts
2. Can Form Complex Shapes
3. High Strength Parts
4. Very Good Surface Finish And Accuracy
5. High Production Rate
6. Low Labor Cost
7. Scrap Can Be Recycled
The Process Of Zinc Die Casting:
The Molten Metal Flows Into A Shot Chamber Through An Inlet And A Plunger, Powered By Hydraulic Pressure, Forces The Molten Metal Through A Gooseneck Channel And Into The Die. Typical Injection Pressures For A Hot Chamber Die Casting Machine Are Between 1000 And 5000 Psi. After The Molten Metal Has Been Injected Into The Die Cavity, The Plunger Remains Down, Holding The Pressure While The Casting Solidifies. After Solidification, The Hydraulic System Retracts The Plunger And The Part Can Be Ejected By The Clamping Unit. Prior To The Injection Of The Molten Metal, This Unit Closes And Clamps The Two Halves Of The