Blow molding machines Plastic Injection Molding Machine - Product

Other Specification : Blow Molding Machines Its Production Capacity Is 60 To 70% More Than The Single Station Machine. ISO 9001,CE, Certificate. # The 12L-16L Doublestation Blow Molding Machinesis Different From The Single Station Machine In That It Has One Additional Station With High-precision Linear Guide, Covering Four Major Series Of DHD-12LIIand DHD-16LII. The Same As The Single Station Machines, It Can Be Used To Produce A Wide Variety Of Materials, Such As PE, PP, And PA. The Largest Capacity Of The Product Can Be 16L, And Its Production Capacity Is 60 To 70% More Than The Single Station Machine. In Accordance With Different Type Of Products, Die Heads Can Be Changed To Achieve Multi-type Production. # Setting: Clamping------------Double Station+Hight-precision Guide+large Arm Cylinder Axle Extrusion System--Hard Gear Surface Reducer+Japan Inverter Die System----------Central-incoming Extrusion Die With Special Steel Hydraulic System--Japan Hydraulic Valve Seal And Proportional Control Control System----Japan PLC+Imported HMI+PLC Automatic - - - - Specification | | DHD-12LII | DHD-16LII | Material | | PEPP | PEPP | Max.container Capacity | L | 12 | 16 | Number Of Die | Set | 12346 | 12346 | Machine Dimension | M | 4.12.53 | 4.52.73.1 | Total Weight | Ton | 10 | 13 | Accumulator Head | | DHD-12LII | DHD-16LII | Number Of Die Heating | Zone | 3 | 4 | Power Of Die Heating | KW | 6-7 | 6-7 | Max Die-pin Diameter | Mm | 140 | 140 | Center Distance Of Twin-die | Mm | 240 | 260 | Center Distance Of Tri-die | Mm | 160 | 180 | Center Distance Of Four-die | Mm | 120 | 130 | Center Distance Of Six-die | Mm | 85 | 90 | Clamping Unit | | DHD-12LII | DHD-16LII | Clamping Force | KN | 110 | 155 | Platen Opening Stroke | Mm | 219-600 | 219-620 | Platen Size | Mm | 460500 | 520480 | Max Mould Size | Mm | 560500 | 600480 | Mould Thickness | Mm | 220-380 | 220-380 |

View Profile