Place of Origin :
Deodorization equipment has a simple structure, low energy consumption, high purification efficiency and a wide range of characteristics, the exhaust gas is introduced into the purification tower by the air duct, through the packing layer, the exhaust gas and sodium hydroxide solution for the gas-liquid two-phase full contact absorption and neutralization reaction, the exhaust gas is purified
Deodorization Equipment has A Simple Structure, Low Energy Consumption, High Purification Efficiency And A Wide Range Of Characteristics, The Exhaust Gas Is Introduced Into The Purification Tower By The Air Duct, Through The Packing Layer, The Exhaust Gas And Sodium Hydroxide Solution For The Gas-liquid Two-phase Full Contact Absorption And Neutralization Reaction, The Exhaust Gas Is Purified, And Then By The Mist Elimination Plate Dehydration And Mist Elimination By The Fan Discharged Into The Atmosphere. The Absorbing Liquid Is Pressurized By Water Pump At The Bottom Of The Tower And Then Sprayed At The Top Of The Tower, And Finally Flows Back To The Bottom Of The Tower For Recycling.
The Biological deodorization Equipment consists Of A Round Tower, Connected By Flanges In Sections. The Specific Structure Consists Of Air Inlet Section, Pressure Chamber, Bubble Liquid Storage Tank, Two-stage Spray Section, Cyclone Plate, Out Of The Wind Cone Cap And Other Components. Its Characteristics Are: Easy To Make, Easy To Install And Maintain, High Strength, Small Footprint. Exhaust Gas Is Pressed Into The Inner Cylinder Of The Purification Tower By The Fan To Form A Pressure Chamber, And Then By The Pressure Chamber Are Assigned To Each Bubble Tube, The Exhaust Gas Through The Bubble Into The Storage Tank Absorption And Neutralization Of The Liquid In The Bubble, So That The Gas-liquid Full Contact To Improve The Purification Efficiency. Then Into The Spray Layer, Spray Form Using Double Packing, Two-stage Spray, So That The Gas-liquid Full Contact, Improve The Purification Efficiency. The Tower Is Equipped With A Glass Fiber Reinforced Plastic Centrifugal Fan And Plastic Water Pump Or Stainless Steel Water Pump. When The Handling Air Volume Is More Than 10000 Cubic Meters, Two Water Pumps Can Meet The Design Requirements.
https://www.tx-frp-enviroequip.com/
