Digital Glass X-ray tubes / ReplacementTOSHIBA X-raytube for Dental Equipment - Product

Other Specification :  Digital Glass X-ray Tubes / Replacement TOSHIBA X-ray Tube For Dental Equipment Quick Detail: Type:Station Anode X-ray Tube Application: For Intra-oral Dental X-ray Unit Model: KL2-0.8-70G Equivalent To CEI OCX/65-G Integrated High Quality Glass Tube Description: KL2-0.8-70G Stationary Anode X-Ray Tube Is Especially Designed For Intra-oral Dental X-ray Unit And Available For A Nominal Tube Voltage With Self-rectified Circuit. And It Is A Grid-control Tube. The Integrated High Quality Tube With Glass Design Has One Super Imposed Focal Spot And A Reinforced Anode. It Is Extremely Important To Observe The Connection Diagram And The Grid-resistor Value. Any Change Could Modify The Dimensions Of The Focal Spot, Also Varying Diagnostic Performances Or Overloading Anode Target. The High Anode Heat Storage Capacity Ensures A Wide Range Of Applications For Intra-oral Dental Application. A Special Designed Anode Enables An Elevated Heat Dissipation Rate Which Leads To A Higher Patient Throughput And A Longer Product Life. A Constant High Dose Yield During The Entire Tube Life Is Ensured By The High Density Tungsten Target. Ease Of Integration Into System Products Is Facilitated By Extensive Technical Support. Applications: KL2-0.8-70G Stationary Anode X-Ray Tube Is Especially Designed For Intra-oral Dental X-ray Unit And Available For A Nominal Tube Voltage With Self-rectified Circuit. Specifications: Nominal Tube Voltage........70Kv Nominal Inverse Voltage........85kV Nominal Tube Current.........8mA Maximum Exposure Times.......... ...3.2s Maximun Anode Cooling Rate210W Max. Anode Heat Content.........7.5kJ Filament Characteristics..Uf=4.0V(Fixed),If=2.80.3A Focal Spot .....0.8(IEC 60336 2005) At 70kV 8mA With 5k To 25 Kbias Resister(Fixed) Grid Resis

View Profile