Aluminum Based PCB Fabrication with HASL and Immersion Gold 1 - 4 Layers - Product

Other Specification : Aluminum Based PCB Fabrication With HASL And Immersion Gold 1 - 4 Layers Capability Layers:1-4layers Base Material: Aluminum/Copper/Iron Alloy Thermal Conductivity (dielectrial Layer): 0.8, 1.5, 2.0, 3.0 W/m.K. Withstand Voltage:2000-8000V Board Thickness: 0.5mm~3.0mm(0.02"~0.12") Copper Thickness: 0.5 OZ, 1.0 OZ, 2.0 OZ, 3.0 OZ, Up To 6 OZ Outline: Routing, Punching, V-Cut Soldermask: White/Black/Blue/Green/Red ,Taiyo PSR4000 White Legend/Silkscreen Color: Black/White Surface Finishing: Immersion Gold, HASL, OSP Max Panel Size: 600*1200mm(23.62"*47.24") Packing: Vacuum/Plastic Bag Samples L/T: 4~6 Days Detailed Product Description Single Layer Metal Core PCB A Simple Layer Single Sided MCPCB Consists Of A Metal Base (usually Aluminum, Or Copper Alloy), Dielectric (non-conducting) Layer, Copper Circuit Layer, IC Components And Solder Mask. The Prepreg Dielectric Provides Excellent Heat Transfer From The Foil And Components To The Base Plate, While Maintaining Excellent Electrical Isolation. The Base Aluminum/copper Plate Gives The Single-sided Substrate Mechanical Integrity, And Distributes And Transfers The Heat To A Heat Sink, Mounting Surface Or Directly To The Ambient Air. The Single-Layer MCPCB Can Be Used With Surface Mount And Chip & Wire Components, And Provides Much Lower Thermal Resistance Than FR4 PWB. The Metal Core Provides Lower Cost Than Ceramic Substrates, And Allows Much Larger Areas Than Ceramic Substrates. Double Layers Metal Core PCB Double Layers MCPCB Is Consisting Of Two Layers Of Copper Conductor, Put Them On Same Side Of Metal Core (usually Aluminum, Copper Or Iron Alloy). The Metal Base Is On The Bottom Of Whole MCPCB, Which Is Different From Double Sided MCPCB(the Two Copper Layers Were Put On The Each Side Of Metal Core Respectively), And You Can Only Populate SMD On Top Side. Different With Single Layer MCPCB, 2 Layers MCPCB Requires A

View Profile