Serial Repeater , RS232 Repeater For Remote Terminal - Product

Other Specification :  Serial Repeater , RS232 Repeater For Remote Terminal Performance Parameters 1. Communication Distance Between Serial Interface RS-232 Extended To 12 Kilometers. 2. Balanced Electricity Transmission With Strong Ability Of Anti-interference. 3. Optical-isolation Technology To Eliminate Grounding Loop Surge And Device Damages. 4. Isolated Voltage: 2,500Vrms Or 500 VDC On A Continuous Basis. 5. RS-232 Asynchronic Communication Standard Supported. 6. Direct Plug In RS-232 Interface, Easy To Use. 7. No Exterior Power Supply Required. 8. Both Dedicated Cable And Common Cable Supported. 9. Transmission Rate As High As 57.6KBPS. 10. Full Duplex Or Half Duplex, Small-sized. Description: UT-2212/UT-3212/213 Serial RS-232 Photoelectric Isolation Line Booster, Also Called Long Line Transceiver Or Long-distance Transmitter, Can Extend The Communication Distance Between Two RS-232 Devices Performing Asynchronic Communications To A Maximum Of 12 Kilometers With Optical Isolation. As The Electric And Grounding Loop Between The Two Ends Of RS-232 Devices Are Completely Blocked By The Advanced Isolation Technology Adopted By Us, Therefore, The Communication Devices Are Well Protected From The Interference And Damages Possibly Caused By Power Grounding Loop Or Surge, Therefore, Obvious Improvement Of The Reliability And Stability Of The Communication System Are Achieved. And At The Same Time, The Previous SR-232 Interface Single-end Transmission Mode Has Been Changed To Double-line Balance Transmission, The Communication Distance Has Been Increased Sharply. For All Those RS-232 Asynchronic Point-to-point Communication Areas Using Dedicated Self-owned Line, UT-2212/UT-3212/213 Can Be Used To Meet The Demand For Interface Protection Or Communication Distance Extension. Without Special Requirements For Cable And No Need Of Exterior Power Supp

View Profile