Opto-Isolation Data Ethernet IO Controller for Automated Test Guide - Product

Place of Origin : Shenzhen,China
Delivery Time : In 7 Working Days

Product Description

Opto-Isolation Data Ethernet IO Controller for Automated Test Guide

Connector allocation
Data devices use 10-pin terminals as their input/output interfaces. Pin allocation is as follows:
Note:
--GND: Ground
--VCC: DC930V power input, operating current: 350mA
--DATA-: communication interface (RS232: data receiving; RS485: RS485-)
--DATA+: communication interface (RS232: data sending; RS485: RS485+)
--INIT: Reset
--IN.COM: 5-24 negative voltage common input end
--IN0,I

Physical Specification

Other Specification : Opto-Isolation Data Ethernet IO Controller For Automated Test Guide Connector Allocation Data Devices Use 10-pin Terminals As Their Input/output Interfaces. Pin Allocation Is As Follows: Note: --GND: Ground --VCC: DC930V Power Input, Operating Current: 350mA --DATA-: Communication Interface (RS232: Data Receiving; RS485: RS485-) --DATA+: Communication Interface (RS232: Data Sending; RS485: RS485+) --INIT: Reset --IN.COM: 5-24 Negative Voltage Common Input End --IN0,IN1,IN2,IN3: 5-24V Positive Voltage Input --NO1,NO2,NO3,NO4: Relay Normally Open End --NC1,NC2: Relay Normally Closed End --COM1,COM2,COM3,COM4: Relay Common End Model UT-5510 Opto-isolated Parallel Data Input/output Controller Uses Four 8-bit Channels For Data Input And Another Four 8-bit Channels For Data Output. All Data Input/out Is Compatible With TTL/DTL Electrical Level. Every Data Input/output Channel Is Similar To That Of Computer Interface. Applications: -- Multi-signal Status Monitoring -- Parallel Data Transmission And Communication -- Industrial Automation And Control -- Laboratory Automation And Control -- Multi-channel Signal Conversion Control -- Induction Electric Eye Monitoring -- Production Line Automation Contro -- Automated Test Guide Specifications:

^{Company Inforamtion}