Digital Spo Medical Pulse Oximeter / Finger Pulse Oximeter Monitor - Product

Other Specification :  Digital Spo Medical Pulse Oximeter / Finger Pulse Oximeter Monitor Section1 # # Instructions For The Safe Operation And Use Of The Fingertip Pulse Oximeter Do Not Attempt To Service The Fingertip Pulse Oximeter. Only Qualified Service Personnel Should Attempt Any Needed Internal Servicing. Do Not Use The Pulse Oximeter In Situations Where Alarms Are Required. The Device Has No Alarms. Prolonged Use Or The Patients Condition May Require Changing The Sensor Site Periodically. Change Sensor Site And Check Skin Integrity, Circulatory Status And Correct Alignment At Least Every 2 Hours. SpO2 Measurements May Be Adversely Affected In The Presence Of High Ambient Light. Shield The Sensor Area (with A Surgical Towel, Or Direct Sunlight, For Example) If Necessary. The Following Reason Will Cause Interference And Defibrillators. High-frequency Electrosurgical. Placement Of A Sensor On An Extremity With A Blood Pressure Cuff Arterial Catheter, Or Intravascular Line. The Patient Has Hypotension Severe Vasoconstriction Severe Anemia Or Hypothermia. The Patient Is In Cardiac Arrest Or Is In Shock. Fingernail Polish Or False Fingernails May Cause Inaccurate SpO2 Readings. 1.2 Warnings WARNING: EXPLOSION HAZARDDo Not Use The Oximeter In A Flammable Atmosphere Where Concentrations Of Flammable Anesthetics Or Other Material May Occur. WARNING: Do Not Throw Batteries In Fire As This May Causes Them To Explode. WARNING: Do Not Attempt To Recharge Normal Dry-cell Batteries, They May Leak, And May Cause A Fire Or Even Explode. WARNING: Do Not Use The Pulse Oximeter In An MRI Or CT Environment. CAUTION: Keep The Operating Environment Free Of Dust, Vibrations, Corrosive, Or Flammable Materials, And Extremes Of Temperature And Humidity. CAUTION: Do Not Operate The Unit If It Is Damp Or Wet Because Of Condensation Or S

View Profile