2600mAh iTaste SVD Healthy E Cig with Scale Display , 900mAh Stainless Steel E Cig - Product
Place of Origin : Shenzhen,China
Delivery Time : SMPL:1-3days; BUlk:3-7days
Product Description
2600mAh iTaste SVD Healthy E Cig with Scale Display , 900mAh Stainless Steel E Cig
Quick Detail:
Scale Display Wattage Scale display
Variable Wattage 6.5W, 7W, 8W, 9W, 10W, 11W, 12W, and 12.5W
Battery Level Indicator
High compatibility 510 connector
ON/OFF Battery Switch
Replaceable Batteries
10-Seconds Cutoff, Short Circuit Protection, Reverse Battery Protection Circuit, etc.
Specifications:
- - - -
iTaste svd Size | (109.7-139.7) *23.5mm |
Physical Specification
Other Specification :
2600mAh ITaste SVD Healthy E Cig With Scale Display , 900mAh Stainless Steel E Cig
Quick Detail:
Scale Display Wattage Scale Display
Variable Wattage 6.5W, 7W, 8W, 9W, 10W, 11W, 12W, And 12.5W
Battery Level Indicator
High Compatibility 510 Connector
ON/OFF Battery Switch
Replaceable Batteries
10-Seconds Cutoff, Short Circuit Protection, Reverse Battery Protection Circuit, Etc.
Specifications:
- - - -
ITaste Svd Size | (109.7-139.7) *23.5mm |
ITaste Svd Battery | 900mAh/1800mAh/2600mAh |
ITaste Svd Charging Time | 1~2 Hours |
ITaste Svd Weight Of Cigarette | 130g |
ITaste Svd Variable Voltage | 3.3V~6V |
ITaste Svd Variable Wattage | 3.0W~5.0W |
ITaste Svd Maximum Current Output | 5.0 Amperage |
- - - -
Description:
1. Battery Installation
18350, 18650 Batteries
2. When Battery Installed And Circuit Connected, The LED Light Will Enter A Blinking Cycle From Red, Yellow To Green And The Digital Display Will Show 888, Then Show The Previous Parameter Setting, And Then Will Be In Off Mod.
3. Quickly Clicking The Power Button Three Times Will Enable Or Disable The Battery, Once Enabled, Holding Down The Button Will Activate The Battery.
4. Holding The Power Button And - Button Simultaneously For 3 Seconds To Enter Voltage Status, Then You Can Adjust The Voltage By Pressing + - Button.
5. Holding The Power Button And + Button Simultaneously For 3 Seconds To Enter Wattage Status, Then You Can Adjust The Voltage By Pressing + - Button.
6. Holding + And - Button Simultaneously For 2 Seconds, The Digit Screen Will Display The Load Ohms, The Load Ohms Range Will Be 0-9.9ohm.
7. Hold Both The + And Buttons For Five Seconds To Lock The Selected Voltage Or Wattage