This is the product title

Lightweight Tile Floor Cleaning Machines Orbital Floor Sander / Polisher - Product


Place of Origin : Dongguan,China
Delivery Time : 30-45 Days

Product Description



Lightweight Tile Floor Cleaning Machines Orbital Floor Sander / Polisher





Quick Detail:



- - - -
Name | Orbital Floor Sander and Polisher | Application | Can do sanding, cleaning, washing, waxing & polishing of all kinds of surfaces. |
Power | 275 W | Working Width | 254 mm (10) |
Working Speed | 300 RPM | Certificate | CE, GS |
- - - -





Description:



> Power: 275 W

> Volt: 110/220 V, 50/60 HZ

> Working W

Physical Specification

Other Specification :  Lightweight Tile Floor Cleaning Machines Orbital Floor Sander / Polisher Quick Detail: - - - - Name | Orbital Floor Sander And Polisher | Application | Can Do Sanding, Cleaning, Washing, Waxing & Polishing Of All Kinds Of Surfaces. | Power | 275 W | Working Width | 254 Mm (10) | Working Speed | 300 RPM | Certificate | CE, GS | - - - - Description: > Power: 275 W > Volt: 110/220 V, 50/60 HZ > Working Width: 254 Mm (10) > Working Speed: 300 RPM > Gross Weight: 12.5 KG > Standard Accessories: 1 Piece Each Of #40, #60, #80, #120 Sanding Paper & Polishing Pad > Easy Operation, No Experience Needed. > Engineered For Quiet And Smooth Operation. > Lightweight, So It Is Easy To Take Anywhere. Because Of The Larger Orbit, You Can Clean Faster With Less Weight. > Efficient Dust Extraction. > Save Time, Effort And Protect Your Health. How To Assemble The Machine? Or How To Use Machine? 1. Assembly For Handle: Turn The Chassis Upside-down And Gently Press The Tab On The Screw Box From Underneath Using A Screwdriver. Remove The Screw Box. Align The Mounting Holes In The Lower Portion Of The Handle Tube With The Front Two Mounting Holes In The Bracket At The Rear Of The Floor Machines Chassis. This Is The Location That The Handle Screw. Then Secure The Handle Tube To The Chassis, Using One Handle Screw, Two Flat Washers, And One Hex Lock Nut. Replace The Screw Box. 2. Assembly And Remove For Vacuum Hose. Assembly: Connect The Vacuum Hose (Dia. 40mm) To The Hose Connector. Then Put The Hose To The Vacuum Connector. Remove: Press The Tab On Vacuum Hose On Pull It Out. 3. Assembly And Replace For Sanding Paper Assembly: Put The Handle Tube Back To Vertical Position, Then Lay The Machine On Its Back With The Handle Lying

Company Inforamtion
Solar Industrial Limited
[ Exporter - China ]
 : 230 Hing Lung East Road
 : 86-769-86621078
 : orbitalfloormac@126.com
 : www.orbitalfloormachine.com/

 : Mr. Benja Leung
 : 8676986621078
 : orbitalfloormac@126.com
View Profile



Top 3 in Electronics & Electrical



Top Products of Solar Industrial Limited