Telecom Cisco 3750-X Power Supply Rectifier, Cisco 3560-X Switch Power Supply Modules - Product

Other Specification : Cisco 3750-X Power Supply And Cisco 3560-X Switch Power Supply Modules The Cisco 3750-x And Cisco 3560-x Switchs Operate With One Or Two C3KX-PWR-350WAC 350W AC Power Supplies. In Addition The Switches Can Run With Power Supplied By An Expandable Power Supply, XPS-2200. A Cisco 3750-X Switch Which Is Connected To A StackPower Stack Is Powered By Other Stack Switches. You Can Use Two AC Modules, Two DC Modules, One AC And One DC Module, Or One Module And A Blank Cover. All C3KX-PWR-350WAC 350W AC Power Supply Modules Have Internal Fans. All Switches Ship With A Blank Cover In The Second Power Supply Slot. The XPS-2200 Has Two Modes: In StackPower Mode, It Supplies Power To The Switches In The Power Stack (only Catalyst 3750-X Switches With IP Base Image). In Expandable Power Supply Mode, It Supplies Power To A Switch When The Switch Power Supply Is Removed Or Fails. When You Install Or Replace A Power Supply Module, The Switch Software Polls The Device. After Polling, The Power Supply Module Provides Power To The Switch, And The XPS-2200 Is Available To Power Other Devices. The C3KX-PWR-350WAC 350W AC Power Supply Modules Are Autoranging Units That Support Input Voltages Between 100 And 240 VAC. The 1100-W Power Supply Module Is An Autoranging Unit That Supports Input Voltages Between 115 And 240 VAC. The 440-W DC Power Supply Module Has Dual Input Feeds (A And B) And Supports Input Voltages Between 36 And 72 VDC. The Output Voltage Range Is 51 To 57 V. Each C3KX-PWR-350WAC 350W AC Power Supply Power Supply Module Has A Power Cord For Connection To An AC Power Outlet. The 1100-W And 715-W Modules Use A 16-AWG Cord (only North America). All Other Modules Use An 18-AWG Cord. The DC Power Supply Module Must Be Wired To A DC Power Source. - - - - ModelNumber | C3KX-PWR-350WAC | Manufacturer | Cisco | Powerconsumption

View Profile